16
2. Environment Setup ( System Setup )
========================================== = = = = = = = = = = = = =
⊠
The environment setup is used to configure the system operation including functions to use and the
time to operate the system to meet the requirements of users.
⊠
Please note the following information.
√
The setup menu consists of 9 tabs. When you finish operation for each tab, click the
“Apply”
button before moving to the next tab.
√
If the system detects a failure, the watch-dog function reboots the system in specified period of
time with the beep. The system is not configured with this function in the warehouse. Check the
watch-dog setup column to use this function.
√
If the beep is configured by interworking with event signals which is different from the watch-
dog function, the beep may be generated. For your reference, the system generates the beep
when the camera signal is disconnected.
√
Some functions automatically reboots the system when selected. These are available only after
the system rebooted.
√
Only four cameras are configured to constantly record the images in the warehouse. Setup the
schedule, and the condition to record and use cameras as required by the field.
√
Click the “Apply” button after configuring each tab and click “OK” to complete the setup
process. Then, following window appears in the monitoring screen and the screen starts to
blink within approximately 5 seconds while initializing the hardware and software.
Summary of Contents for n-E4E
Page 7: ...7...
Page 57: ...57 Digital Video Recorder...
