89
Figure 7-24
7.6.4 Image
Click image button, the interface is shown as below. See
545H545H544H
Figure 7-25.
Here you can select the image quality and protocols for each channel.
Here you can set encode mode, quality and protocol for each channel. You can
select from the dropdown list.
z
FPS (PAL): there are several options: 1/2/3/6/12/25. (Some series DVR only
support 25f/s PAL.)
z
Data: there are two data modes: CBR/VBR.
z
Quality: There are six levels. The different data flux occupies different bandwidth
and the transmission image qualities are also different. Among them, level 6
needs the widest bandwidth and can reveal the best image quality. Please note
you setup here only applies for image quality in web or client end.
z
Resolution: there are several resolutions for you. You can select from the
dropdown list.
z
Alarm when video loss: You can enable or disable alarm function when alarm
loss occurred.
z
Network transmission protocol: Select protocol for network playback and monitor.
You can select from the dropdown list.
