51
Figure 4-32
4.9.6 Activate Pattern Function
In
435H435H434H
Figure 4-29, input mode value in the No. blank, and click pattern button.
4.9.7 Auto Scan Setup
In
436H436H435H
Figure 4-28, click border button. The interface is shown as in
437H437H436H
Figure 4-23.
Please go to
438H438H437H
Figure 4-25, use direction arrows to select camera left limit
Then please go to
439H439H438H
Figure 4-33 and click left limit button
Repeat the above procedures to set right limit.
Figure 4-33
4.9.8 Activate Auto Scan
In
440H440H439H
Figure 4-29, click “Auto Scan” button, the system begins auto scan.
Correspondingly, the auto scan button changes to stop button. Click stop button to
terminate scan operation.
4.10 Dome Menu Control
In
441H441H440H
Figure 4-29, click page switch button, the interface is shown as below. See
442H442H441H
Figure
4-34.
Click menu to enter dome menu. The direction arrows here are to control dome
menu. Click page switch button, system goes back to
443H443H442H
Figure 4-25
Figure 4-34
