30
Pattern Value
：
1
Patter setup
＞
Start
Rotation Stop
Pattern Value
：
1
Pattern setup Start
Pan rotation Stop
＞
Speed
4.4.5 PATTERN
4.4.5.1 Pattern setup
•
Move cursor to highlight pattern and then input pattern
value. Input value is the pattern path you want to set
(Maximally support five paths). Click ENTER to confirm.
•
Move cursor to highlight start and then input pattern value.
Now click ENTER to confirm.
•
Move cursor to highlight stop. Input pattern value and click
ENTER to stop pattern. Dome will automatically memorize
all the operations you have done.
4.4.5.2 Pattern operation
•
Pleas use up/down keys to highlight pattern. When cursor is
before start, please input pattern value and then click ENTER
to begin pattering.
•
Move cursor to highlight stop and then click ENTER. System
stop pattern.
4.4.6 Pan
Rotation
Move cursor to highlight speed. Input speed value (the speed
you want) and click ENTER.
Then move cursor to highlight start and then click ENTER.
Dome begins pan rotation.
Move cursor to highlight stop and then click ENTER. Dome stops
rotation.
Pattern Value
：
1
Pattern setup
＞
Start
Rotation Stop
