24
3. DH-FD suspended bracket fittings
Step 1
－
Dig four holes in the wall
Draw four
Φ
6 holes (not supplied) in the wall in accordance with holes of fixed
chassis and then insert
Φ
6 expansion bolts into the holes.
Step 2
－
Pendant bracket connection chassis installation
Connect control cable, video cable, power cable and network cable through the
chassis centre hole. Fasten rubber pad on the suspended chassis. Insert the chassis
four holes into expansion bolts and use screw cap and gasket to fix firmly. Wipe
glass glue (not supplied) at the string holes to enhance waterproof ability.
Note: please make sure the cable is long enough to pull through the hole.
Step 3
－
Suspended bracket installation
Sealed plastic pad
Sealed rubber ring
Set screw
