13
Note: Please make sure the clips on both sides are firmly fixed. You can follow the
tab on the outside cover to check.
Step 4
a
. Install transparent cover
Insert the silica gel ring into the
pressured groove of the lower dome.
b.
Connect unfixed end of the steel
interior safety cab with the fasten end of
carriage in the lower dome.
Line up the two bolts in the carriage up
with the dome interior cover holes and
then press the transparent cover into the
dome. Screw the two stainless bolts to
fix the lower dome.
Note: please strictly follow above mentioned instructions to guarantee the
lower dome meet the IP66 waterproof level.
2.7
Network Speed Dome Installation Dimension
You can refer to the following figure for installation dimensions,
Fasten bolt
