Chapter 10 LAN
EMG2926-Q10A User’s Guide
100
10.5 LAN Advanced Screen
Use this screen to enable the guest LAN and turn on bandwidth management for guest networks.
Click
LAN
>
Advanced
.
Figure 70
Network > LAN > Advanced
IPv6 Address
range(End)
If you select
Stateful DHCPv6
, specify the range of IPv6 addresses from which the
DHCPv6 server assigns to the clients. Enter the largest value of the last block of IPv6
addresses to be allocated.
IPv6 Lifetime
If you select
Stateful DHCPv6
, specify how long (in seconds) you wish the IPv6
addresses to remain valid.
Static IP Address
Select this option to manually enter an IPv6 address if you want to use a static IPv6
address.
LAN IPv6
Address
Enter the static IPv6 address for the EMG2926-Q10A on the LAN.
LAN IPv6 Prefix
Length
Enter an IPv6 prefix length that specifies how many most significant bits (start from the
left) in the address compose the network address.
Prefix Preferred
Lifetime
Enter how long (in seconds) you wish addresses generated from the prefix via stateless
address autoconfiguration to remain preferred.
Prefix Valid
Lifetime
Enter how long (in seconds) you wish prefix to be valid for on-link determination.
Link Local Only
Select this option to use the EMG2926-Q10A’s IPv6 link-local address on the LAN.
ULA
Select this option to use the EMG2926-Q10A’s IPv6 Unique Local Address (ULA).
An IPv6 unique local address has a prefix of FC00::/7 and is similar to the blocks of IPv4
addresses for private networks, such as 10.0.0.0/8, 172.16.0.0/12 or 192.168.0.0/16.
Apply
Click
Apply
to save your changes to the EMG2926-Q10A.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Table 45
Network > LAN > IPv6 LAN (continued)
LABEL
DESCRIPTION
