12
RC-U49C+ REMOTE CONTROL
(CONTINUED)
Mode Lock™
Your CheckMate
®
IV remote can be set-up in two different operating modes - "locked" and "unlocked". From the factory,
it is set in its "locked" mode, which means it will operate all the functions of your cable set-top terminal, plus a limited
number of functions of your TV, VCR, DVD devices. In its locked mode, your remote is unable to change channels on your
TV device.
By comparison, in its "unlocked" mode, it can still operate all the functions of your cable set-top terminal, but more of the
functions of your TV, VCR and DVD devices.
The following steps will allow you to set your remote to its "unlocked" mode, or reset it to its "locked" mode.
To "unlock" your remote for multi-device operation…
1. Press CBL, then MUTE together until the CBL button illuminates.
2. Press [9, 9, 9]. The CBL button will blink 3-times and go out.
To "lock" your remote in its cable operating mode for single-device operation...
1. Press CBL, then MUTE together until the CBL button illuminates.
2. Press [0, 0, 0]. The CBL button will blink 3-times and go out.
TV/VCR Input
In the remote's Cable and TV modes, this button operates the TV Input function on your TV. In the remote's VIDEO mode,
this button changes the TV/VCR function on your VCR.
You can program this button so that in the remote's cable mode, TV/VCR will operate the TV/VCR function on your VCR,
eliminating the need to change modes on the remote.
To program the TV/VCR button to operate your VCR...
1. First activate CBL mode.
2. Press TV/VCR, then SELECT together until the CBL button illuminates.
3. Press VIDEO. The CBL button will blink 3-times and go out.
To return this button to operate the TV Input function on your TV, repeat step 1, then press TV in step 2.