9
RC-U49C+ REMOTE CONTROL
(CONTINUED)
ALL button
Once you have programmed each of your devices, press ALL button to turn all of them on/off with a single button press.
You can also program the ALL button to tune your TV to its correct output channel (usually 3).
Programming the ALL Button
1. Press MODE, then CBL to select the remote’s cable mode.
2. Press SETTINGS, then ALL together until the TV button illuminates.
3. Press [0] , then [3] .
4. Press CH+ to store the TV channel. The TV button will blink 3-times and go out.
Using the ALL button
When pressing the ALL button, be sure to keep the remote control aimed at your electronic devices until your electronic
devices turn on or off.
Resetting the ALL button
1. Press MODE, then CBL to select the remote’s cable mode.
2. Press SETTINGS, then ALL together until the TV button illuminates.
3. Press CH+. The TV button will blink 3-times and go out.
M1, M2 buttons
Your remote has 2 Channel Memory Buttons – M1 and M2. Each of these buttons can store up to 5 cable channels.
Each cable channel can be up to 5-digits. Some or all of your remote’s Channel Memory Buttons may come pre-tuned to
channels or functions selected by your cable operator. If they have not been pre-tuned by your cable operator, they can
be programmed as follows:
Programming M1 and M2 buttons
To program the M1 button to cable channels 1, 12, 123, 231 and 17, follow these steps:
1. Press M1, then CBL together until the CBL button illuminates.
2. Enter each channel as follows:
a. Enter 1st channel # - 001.
b. Press CH+ to advance to next channel # setting.
c. Enter 2nd channel # - 012.
d. Press CH+ to advance to next channel # setting.
e. Enter 3rd channel # - 123.
f. Press CH+ to advance to next channel # setting.
g. Enter 4th channel # - 231.
h. Press CH+ to advance to next channel # setting.
i. Enter 5th channel # - 017.
3. Press M1 to store the above channels. The CBL button will blink 3-times and go out. To store fewer than 5 channels,
you can press the M1 button any time after entering a complete channel number.
4. Repeat the above steps to program the M2 button. Follow the example in step 1, but press M2, then CBL together
until the CBL button illuminates.
•
Your TV output channel may also be 2 or 4.
•
Depending on your TV brand, the channel may have to be entered as 3, 03 ou 003.
