6. Ensure the power supply is disconnected
from the main supply. Connect the leads
into the rear of the TV and push the TV
into the frame. You will hear the magnets
'click' when the TV is in position.
INSTALLATION PROCEDURE
7
4. Screw the frame into position.
If a Backbox is used then use the screws provided to
fix the wall frame to the Backbox at the 4 corners.
If a Backbox is not used then fix the wall frame straight
to the wall using the multiple fixing holes that are
available. The frame must be fitted with at least one
fixing hole in each corner. Take care not to over
tighten & bend the frame.
Clean off the excess silicone sealant. Leave to set
before continuing installation.
5. Smear a generous amount of the silicone grease
provided along the inside edge of the wall frame and
along the rubber seal of the TV.
7. Connect the power supply to the main outlet and turn it on. A red light will glow
around the standby icon and the TV is now ready to use.
TV REMOVAL
The TV must only be removed with the Videotree removal tool, following the instruc-
tions provided with it.
Contact your distributor for information about purchasing a removal tool.
