The Videospa TV has 3 different settings that improves the customer experience. To have access to these
settings, the TV must be in STANDBY/OFF mode and only the master remote can be used. The waterproof
remote has been locked to prevent any changes from unauthorised users.
Red : Restore Factory Settings
Green : Touch Sensitivity
Blue : LED’s Flash Setting
Yellow : Audio Beep Setting
TOUCH SENSITIVITY SETTING
The touch system has 7 different levels from off to maximum sensitivity. The factory default setting is 5.
1. Ensure TV is in standby. Press the GREEN button on the MASTER remote.
2. Scroll up or down with the arrow keys and save the changes with the OK button.
3. All the LED’s go off and after 2 seconds the standby LED’s go on (all red).
1 2 3 4 5 6 7
Level 1 - Touch control is disabled.
The touch will not respond to anything.
Level 2 - Touch control is at its least sensitive.
There is minimum risk of false activation. A strong finger press is required to activate.
Level 5 - This is the default setting.
This level is suitable for most environments. A change of level from this is only required if you
experience false activation of the touch control.
Level 7 - Touch control is at its maximum sensitivity.
There is maximum risk of false activation, so only use for clean & dry environments. The touch
will respond to a very light finger press
11
TOUCH CONTROL SETTINGS
RESTORE FACTORY SETTINGS
1. Ensure TV is in standby. Press the RED button on the MASTER remote.
2. All the LED’s go off and after 2 seconds the standby LED’s go on (all red).
