Videotec VD816PR1, Operating Instructions Manual

Page: 10 / 56

Pag. 4 MNVCVD816P_1729_EN
5 Installation
The installation must be carried out only by qualified technical staff .
The following procedures must be carried out with power supply off, if not otherwise specified.
5.1 Unpacking
If the packing shows no relevant defects (due to falls or anomalous abrasions), check the material contained,
according to the list given at paragraph
Packing contents chapter Introduction .
The packing materials can be completely recycled. The installer technician is required to dispose of them
according to the differentiated collecting modalities or, anyway, according to the normative laws in force in the
Country of use.
5.2 Check of identification data
Before installing the appliance, check that the material supplied corresponds to the specifications
indicated on the data plate, following the chapter Identification data . Do not carry out any modification or
connections which are not provided for in this manual: the use of improper appliances may seriously
compromise the safety of the personnel and the installation.