Videotec SW42K, Operating Instructions Manual

Page: 20 / 53

Pag. 2 SW42LOC/SW82LOC9904
Introduction
Packing contents
•
1 sequential switcher SW42LOC/SW82LOC - SW42K/SW82K
•
1 instruction manual
After the delivery check that the packing is not damaged and shows no relevant signs of falls or abrasions. Should this
be so, contact immediately the supplier. Check that the contents correspond to the above-mentioned list of materials.
Contents of this Instruction Manual
This manual describes the SW42LOC/SW82LOC - SW42K/SW82K sequential switchers, together with their specific
procedures of installation, configuration and use.
Read carefully this manual, in particular the chapter concerning the safety rules, before the switcher installation
and use.
Addressee of the Instruction Manual
The different parts of this manual are meant to satisfy two operative requirements, those of the installer technician and
those of the operator.
Installer technician : skilled technician able to carry out the safety system installation and to verify its functionality.
He has the necessary technical knowledge to install, connect and configurate the system. Only the installer technician
is allowed to carry out the operations reserved to “Technical staff”.
Operator : end user who operates on the control keyboard to set up the operating modes of the whole system. In case
of multi-user systems, up to 4 operators can work at the same time on the available resources (video inputs, monitors,
etc.).
What to read
The installation procedures, mainly addressed to the installer technician are described from page 5.
The operator is supposed to read from page 8, for the use of the keyboard and direct switching.
Typographic conventions
Different graphic symbols are used in this manual, the meaning of which is here described:
Hazard of electric shock; disconnect the power supply before proceeding, if not otherwise specified.
Read carefully the procedures or information indicated, and if necessary carry out what is prescribed according
to the required modalities. An incorrect procedure may compromise the system operation or damage it.
Read carefully to understand the system operation.
Version SW42K/SW82K: Warning
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.