Videotec SW164OSM, Operating Instructions Manual

Page: 58 / 135

Page 21 SW164OSM 9901
Alarm parameters
From the main menu, press
3
to access the ALARM submenu.
Select theparameters to access by keying in the respective number.
ALARMS 3.
------------------------
1. Contact types
2. Groups
3. Time cycle
4. Reset
5. Acknowledgement
6. Other parameters
------------------------
PROG.End
Alarm contacts
From ALARM menu, press
1
to access the CONTACT
TYPE submenu.
Three types of alarm contacts are available:
•
NO
normally open
•
NC
normally closed
•
--
not used.
Press the relevant number (1/16) to modify the type of
contact.
M
copies the definition of the first contact to all the others.
P
confirms the modifications and returns to the previous
menu
CONTACT TYPE 3.1
------------------------
1.NO 9.-- Push 1/16
2.NO 10.-- to toggle
3.NO 11.-- contact
4.NO 12.-- type
5.NC 13.--
6.NC 14.-- M/A.Copy
7.—- 15.-- first
8.—- 16.--
------------------------
PROG.End
Alarm groups
From ALARM menu, press
2
to access the GROUP
submenu.
Each alarm contact corresponds to a group of video inputs
(the “alarm group”)
In the shown example, when the contact 2 is alarmed,inputs
1, 2, 3 and 7 are displayed in sequence cycle.
The contact to be configured is selected by
U
and
D
.
Pressing the number 1/16, each input to be displayed is
activated (x) or disabled (-).
C
Clear returns to basic configuration, erasing the present
modifications.
P
confirms and returns to the previous menu.
ALARM GROUPS 3.2
------------------------
Alarm no.2
1.X 9.- Push 1/16
2.X 10.- to toggle
3.X 11.-
4.- 12.-
á .Next alarm
5.- 13.-
â
.Prev.alarm
6.- 14.-
7.X 15.- CLEAR.Default
8.- 16.- PROG.End
Alarm contact
number
Group of inputs
Alarm contact