Videotec MAXIMUS MPX, Instruction Manual

Page: 16 / 116

EN - English - I
nstruc
tion manual
14 MNVXMPXTH264_1825_EN
1.3.14 Tools Page
From menu entry Tools it is possible to re-set the
predefined values for the entire configuration of
device or only for a number of specific sections.
This section:
• Update the firmware of the device.
• Restart the device.
Fig. 35
1.3.15 Factory Default
To restore the factory settings relative to the network,
user access and camera configuration follow this
procedure:
• Switch off the unit.
• Connecting the reset kit to the encoder that must
be reset.
• Power the unit. Wait for 2 minutes.
• Press and hold the reset button for 15 seconds..
• Switch off the unit.
• Remove the reset kit.
• Power the unit.
VIDEO - 1
FUSE
FUSE
100nMBW3
L
N
VAR3
VAR1
AC
AL1
AL2
AL3
AL4
AL5
COM
RL1
RL1
RL2
RL2
GND
W
GND
B
A
B
A
IN
J1
J6
J2
J3
J8
J7
FUS1
VAR2
VIDEO - 2
RS485
FUS2
J9
Fig. 36
2 Instructions for safe
operation
2.1 Special controls
SPECIAL CONTROLS
Action Command
Protocol
TCAM ONVIF (auxiliary
command)
Wiper Start Save Preset 85 tt:Wiper|On
Wiper Stop Save Preset 86 tt:Wiper|Off
Washer Save Preset 87 tt:Washing Proced
ure|On
Night Mode On Save Preset 88 tt:IRLamp|On
Night Mode Off Save Preset 89 tt:IRLamp|Off
Reboot the device Save Preset 94 –
Enabling OSM Save Preset 95 tt:OSM|On
Patrol Start Save Preset 93 tt:Patrol|On
Patrol Stop Save Preset 92 tt:Patrol|Off
Autopan Start Save Preset 99 tt:Autopan|On
Autopan Stop Save Preset 96 tt:Autopan|Off
Tab. 2
3 Technical data
3.1 Video
Video encoder
• Communication protocol: ONVIF, Profile S
• Device configuration: TCP/IPv4-IPv6, UDP/IPv4-
IPv6, HTTP, NTP, DHCP, WS-DISCOVERY, QoS, IGMP
(Multicast)
• Streaming: RTSP, RTCP, RTP/IPv4
• Video compression: H.264/AVC, MJPEG
• Independent video streams: 2
• Image resolution: from Full D1 (720x576 for PAL,
720x480 for NTSC) to 352x240
• Web Server