Videotec DCZ, Instruction Manual

Page: 18 / 84

EN - English - I
nstruc
tions manual
16
9.7.2.2 Reduced modifications to the
joystick default settings
Example: If you want to maintain most of the central
group of keys, move key 1, create a double key for
number 2.
OPERATION / COMMAND EFFECT
Enter the programming settings
Select
5 Resets the JOYHID key
chart to default settings
Disconnect and reconnect the
keyboard It restarts in JOYHID mode
Enter the programming settings again
Select
7 It switches to VCOM mode
without resetting the
joystick lookup chart
Disconnect and reconnect the
keyboard It restarts in VCOM mode
[BlockModeStart]
Command
This allows you to
modify the internal
memory without using
it for multiple writing
commands.
[LookupWrite34,0]
Command
Cancels key 1 from the
default position (row 3,
column 4)
[LookupWrite31,60001]
Command
Assigns key 1 (60001)
to the key on row 3,
column 1
[LookupWrite32,60002]
Command
Creates a second 2 key on
row 3, column 2
[BlockModeEnd]
Command
Saves the modifications to
the internal memory
Enter the programming settings
Select
8 Switches to JOYHID mode
without resetting the
lookup chart that has just
been modified
Disconnect and reconnect the
keyboard It restarts in JOYHID mode
Check that the corresponding
LEDs come on when the keys
are pressed
Tab. 06
9.7.2.1 Creating shift keys in VCOM mode
The keyboard can have up to 8 shift keys, used to
change the behaviour of ordinary keys.
Example: Transform key 86 into shift key number 1,
and key 87 into shift key number 7.
OPERATION / COMMAND EFFECT
Enter the programming settings
Select
4
It switches to VCOM mode
resetting the joystick
lookup chart
Disconnect and reconnect the
keyboard It restarts in VCOM mode
[BlockModeStart]
Command
This allows you to
modify the internal
memory without using
it for multiple writing
commands.
[LookupWrite86,1001]
Command
Creates the shift key 1
changing the behaviour of
key on row 8, column 6
[LookupWrite87,1007]
Command
Creates the shift key 7
changing the behaviour of
key on row 8, column 7
[BlockModeEnd]
Command
Saves the modifications to
the internal memory
Tab. 05
To check the correct definition of the shift keys:
• Press
ESC (key 1,3) without any shift key: The
keyboard sends the code
[K+13]
;
• Press INFO (key in line 8, column 6, defined as
shift number 1) and ESC : The key sends the code
[K+13:1]
. The shift keys that have been pressed
are identified by the colon;
• Press SHIFT (arrow-up symbol, key in line 8,
column 7, defined as shift number 7) and ESC :
The keyboard sends the code
[K+13:7]
;
• Press INFO , SHIFT and ESC : The keyboard
sends the code
[K+13:17]
.