Videotec DCJ, Operating Instructions Manual

Page: 215 / 256

Page 85 MNVADCJ01_
1729
_EN
6.10 Hitron Fastrax II Dome
6.10.1 Material and reference documents
Fastrax II HID2404SM11P Dome
Fastrax II (HID-2404) Protocol and Examples
6.10.2 Connection
6.10.2.1 Cable
White
Yellow
RS485A
RS485B
TX +
TX -
6.10.2.2 Setting up the dome
The dome number should be configured correctly.
The protocol should be set as FASTRAX II.
The baud rate can be selected between: 2400 (default), 4800, 9600 baud.
Consult the dome manual.
6.10.2.3 Setting up the keyboard
While configuring the keyboard, the submenu

, should have the
following settings:




The baud rate should correspond to the one chosen for the
dome.

6.10.3 Configuration
Dome configuration is mostly carried out using the On Screen Menu.
For all dome setup operations the keyboard should be enabled for TELEMETRY CONFIGURATION (menu

).
6.10.3.1 OSM Configuration
Directly connect the dome to the keyboard as shown in the diagram and a monitor to the dome video output.

start dome configuration.
The dome shows the on screen menu; the keyboard display shows the mode change:





end of configuration.
The ESC key required by dome configuration procedure is replaced by the

key.
Important note! When exiting dome configuration it is necessary to press


to return the keyboard to normal
operation.