background image

 

Digital Recorder

 

 

 

 

29

 

 

 

 

12.6 Physical and Environmental 

12.6.1 Power 

Requirements 

 

Power supply switch set to 115V 

Power supply switch set to 230V 

Voltage 

90-135 Vac 47-63Hz 

180-265 Vac 47-63Hz 

Current 

2A  maximum 

1A maximum 

12.6.2 CE 

Marking 

This product is CE marked. It has been fully tested and complies with 89/336/EEC 
Electromagnetic Compatibility and 73/23/EEC Low Voltage directives, and with EN 
60950:2000 safety standards. 

Warning

: This is a Class A product. In a domestic environment this product may cause 

radio interference in which case the user may be required to take adequate measures. 

12.6.3 

Dimensions and Weight 

 Width 

Height 

 

Depth 

Weight 

Unit 165mm 

200mm 

310mm 

6Kg 

Packaged 275mm 

380mm 

475mm 

8Kg 

12.6.4 

Temperature and Humidity 

 Operating 

Storage 

Temperature 

10 to 35 º C 

-20 to 60 º C 

Humidity 

5 to 95% non-condensing 

5 to 95% non-condensing 

 

12.6.5 Ventilation 

The Vi100 Digital Recorder has ventilation holes in the base, front and rear. Using internal 
fans, the unit creates a continuous flow of air through the unit to control the temperature of 
the disc drives and other internal components. 

The ventilation holes must not be obstructed otherwise the lifetime and reliability of the 
system may be affected. 

12.6.6 Safety 

For warranty and safety reasons, the cover of this equipment must not be removed. There 
are no user serviceable parts inside. 

 

Summary of Contents for Vi100






































Reviews: