Doc # APN-24M8.29IP
Issue Date: 03/23/2020
Revision: C
Page 36 of 71
21.
Event
Motion detection is used to generate an alarm whenever movement occurs (or stops) in the viewer. A total
of 8 Motion/Mask areas can be created and configured.
Name:
Enter the name for the motion or mask area.
Sensitivity: Configure the sensitivity for the motion detection.
Dwell time: Dwell time means how long the motion/mask signal is held as an input signaling source.
Once the motion detection areas are configured, this camera can be configured to perform actions when
motion is detected. Possible actions include uploading images, alarm out and E-mailing.
To create a motion or mask area, follow these steps:
1.
Click the right button of the mouse to see the menu.
2.
Select Create detection area or Create masking area in the menu.
3.
Click and drag mouse to designate a motion area.
•
Create detection area ― define areas where motion should be detected.
•
Create masking area ― define areas where motion should be ignored.
To delete a motion or mask area, click the Delete button.
CONFIDENTIAL
