Doc # APN-24M8.29IP
Issue Date: 03/23/2020
Revision: C
Page 60 of 71
IPv4 Address: The DHCP (Dynamic Host Configuration Protocol) server has a feature that automatically
assigns an IP address to the device if there is a device on the network.
Obtain IP address via DHCP server: Select the choice box if you want to assign the IP address from
the DHCP server automatically, and then the remaining setting are read-only text.
IP address: The address of the camera connected to the network. Specify a unique IP address for this
network camera.
Subnet mask: The address that determines the IP network that the camera is connected to (relative to
its address). Specify the mask for the subnet that the network camera is located on.
Gateway: The gateway that accesses other networks. Specify the IP address of the default router
(Gateway) used for connecting devices attached to different networks and network segments.
Use the following IP address: Select the choice box if you want to assign the IP address manually.
IPv6 Address: Check this box to enable IPv6 address configuration. Other settings for IPv6 are
configured in the network router.
DNS: DNS (Domain Name Service) provides the translation of host names to IP addresses on your
network.
Obtain DNS server via DHCP server: Select the choice box if you want to use the DNS server settings
provided by the DHCP server automatically, and then the remaining settings are read-only text.
Use the following DNS server address: Select the choice box if you want to use the desired DNS
server manually.
Domain name: Enter the domain to search for the host name used by the network camera.
Primary DNS server: Enter the IP address of the primary DNS server.
Secondary DNS server: Enter the IP address of the secondary DNS server.
Hostname: This camera can be accessed using a host name instead of an IP address. The host name is
usually the same as the assigned DNS name.
Port: Allow the user to access the camera using web browser encrypted communication.
HTTP port: The default HTTP (Hypertext Transfer Protocol) port number is 80 and can be changed to any
port within the range 1024-65535.
HTTPS port: The default port number is 443 and can be changed to any port within the range 1024-
65535.
RTSP port: RTSP (Real Time Streaming Protocol) allows a connecting client to start a video stream. The
default setting is 7070 and can be changed to any port within the range 1024-65535.
CONFIDENTIAL
