Doc # APN-24M8.29IP
Issue Date: 03/23/2020
Revision: C
Page 56 of 71
24.3.
IP Filter
Provides the IP filtering elements such as On/Off, Priority, Policy and IP Ranges. The default
setting is disabling.
Enable IP address filtering: Click the Enable IP filtering checkbox to enable the IP address filtering
function. This dialog allows you to add new allowed/denied IP addresses. Whole range (subnets) of IP
address can be added directly.
On/Off: Click the checkbox to activate the settings (Priority, Policy, and IP ranges). Priority: The number
means a priority if there are duplicated IP addresses and IP ranges. Policy: Determines the filtering
attribute of the IP address selected.
Start IP: Enters the start IP address to ALLOW/ DENY in the IP range selected.
End IP: Enters the end IP address to ALLOW/ DENY in the IP range selected.
NOTES
To add a subnet of network addresses, these must be added in CIDR (Classless
Inter-Domain Routing) notation. For example: entering 192.168.1.0/24 will add all the addresses in the
range 192.168.1.1 to 192.168.1.254. Please contact your network administrator for more detail.
•
If you are accessing the network camera via a proxy server, the IP address for the proxy server
must be added as an allowed address.
CONFIDENTIAL
