background image

COPYRIGHT

Copyright 

©

 2001 Imagination Technologies Limited, an Imagination Technologies plc Company. All

rights reserved. No part of this publication may be copied or distributed, transmitted, transcribed, stored
in a retrieval system, or translated into any human or computer language, in any form or by any means,
electronic, mechanical, magnetic, manual or otherwise, or disclosed to third parties without the express
written permission of Imagination Technologies Limited. The trademarks and any copyright or other
intellectual property rights of whatever nature that subsist or may subsist in the Software Package (including
but not limited to all programs, compilation of command words and other syntax contained therein) are
and shall remain the property of Imagination Technologies Limited absolutely.
This product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorised by Macrovision Corporation, and
is intended for home and other limited viewing uses unless otherwise authorised by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.

DISCLAIMER

Imagination Technologies Limited makes no representation or warranties with respect to the content of
this document and specifically disclaims any implied warranties of merchantability or fitness for any
particular purpose. Further, Imagination Technologies Limited reserves the right to revise this publication
and to make changes in it without obligation of Imagination Technologies Limited to notify any person
or organization of such revision or changes.

TRADEMARKS

Microsoft is a registered trademark, and Windows is a trademark, of Microsoft Corporation. VideoLogic
and Imagination Technologies are registered trademarks of Imagination Technologies Limited. All other
product names are trademarks of their respective companies.

CREDITS

This manual was written by Bruce Murray. It is a product of Imagination Technologies Limited, Home Park
Estate, Kings Langley, Hertfordshire WD4 8LZ, United Kingdom.

11R70

Third Edition

November 2001

RADIO AND TELEVISION INTERFERENCE

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio and television reception, which can
be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and

the receiver.

- Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

- Consult an authorized VideoLogic dealer or service

representative for help.

Properly shielded and grounded cables and connectors
must be used in order to meet FCC emission limits. Proper
cables and connectors are available from authorized
dealers. VideoLogic is not responsible for any radio or
television interference caused by using other than
recommended cables and connectors or by unauthorized
changes or modifications to this equipment. Unauthorized
changes or modifications could void the user’s authority
to operate the equipment.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.

ELECTROMAGNETIC COMPATIBILITY (EUROPE)

This equipment complies with the European new approach
directive on EMC (Directive 89/336/EEC). Please contact
us for further details.

PRODUCT SERVICE

All VideoLogic products carry a 12 month warranty. If you
have a problem with a VideoLogic product, contact your
Reseller or place of purchase first. Authorized VideoLogic
Resellers will be able to identify faults for you. Products
returned under warranty with relevant proof of purchase
are serviced or replaced free of charge.

LIMITED WARRANTY

VideoLogic warrants the Product to be in good working
order for a period of five (5) years from the date of
purchase (the “Warranty Period”), as indicated on the
sales receipt. Should the product not be in good working
order VideoLogic will, at its option, repair or replace the
Product free of charge. This Warranty does not cover
damage that occurs as a result of negligence in shipment
or that results from alteration, accident, misuse or neglect.
Repair parts and replacement Products will be furnished
on an exchange basis and will either be new, equivalent to
new or reconditioned. All replaced parts and Products will
become the property of VideoLogic.
Warranty service may be obtained by delivering or shipping
the Product, postage prepaid, prior to the expiration of the
Warranty Period to a VideoLogic Authorized Reseller for
the Product, together with proof of purchase and a
description of the problem. VideoLogic requests (but
does not require) that you complete and return the Warranty
Registration Card enclosed, in order to verify warranty
status in the event of a dispute.

THIS

 

IS

 

A

 

LIMITED

 

WARRANTY

VIDEOLOGIC

 

MAKES

 

NO

 

OTHER

WARRANTIES

EXPRESS

 

OR

 

IMPLIED

INCLUDING

 

BUT

 

NOT

LIMITED

 

TO

 

THE

 

IMPLIED

 

WARRANTIES

 

OF

 

MERCHANTABILITY

AND

 

FITNESS

 

FOR

 

A

 

PARTICULAR

 

PURPOSE

IN

 

NO

 

EVENT

 

WILL

VIDEOLOGIC

 

BE

 

LIABLE

 

FOR

 

INCIDENTAL

 

OR

 

CONSEQUENTIAL

DAMAGES

 

EVEN

 

IF

 

IT

 

HAS

 

BEEN

 

ADVISED

 

OF

 

THE

 

POSSIBILITY

OF

 

SUCH

 

DAMAGES

.

Summary of Contents for Vivid!XS

























Reviews: