background image

CHAPTER 4. HARDWARE INSTALLATION |    6 

4.1 PC2TVwifi Connection 
 

    4.1.1 AP Mode (without internet) 

 

 

 

 

 

 

    4.1.2 STA Mode (with internet) 

 

 

 

 

 

 

 

 

 

4.2 AP Mode Connection 

 

       

4.2.1 Hardware Connection 

 

 

 

 

                                (1) Properly connect VGA (PC2TVwifi) output port to TV / Monitor /      

                                                                      Projector / etc… 

                                 (2) Connect power adapter to “DC5V” (PC2TVwifi) power jack. 

                                                                (3) Power on PC2TVwifi device. Waiting around 

40~60 seconds

.   

                                   And then it will run into the 

Ready

 screen. 

                                   (If waiting over 60 seconds, please restart PC2TVwifi) 

 

 

 

 

 

 

                                                - The screen of PC2TVwifi device should stay at 

                                                 the waiting screen as the picture. 

 

                                                                                                - 

The device information and Wi-Fi configuration           

                                                                                                  are shown as well. 

Summary of Contents for PC2TVWiFi






















Reviews: