20
XTO-IP
Alarm panel
INSTALLATION MANUAL
5. 2G3G ERROR CODES
2G3G LEVEL :
ERROR XXX
In case of 2G3G (GPRS) errors during initial programming, we strongly
suggest to continue with the installation and perform the 2G3G (GPRS) level
test again once achieved.
IMPORTANT
: The PIN of the SIM card has to be deactivated or 00000.
Codes
Errors
03 ou 04
LP
1RQHWZRUNFRYHUDJHRUQR6,0FDUG
LQVHUWHG
003
6,0FDUGQRWGHWHFWHGQRWLQVHUWHG
010
6,0QRWLQVHUWHG
011
3,1FRGHQHFHVVDU\
-> PIN code must be deactivated
012
38.FRGHQHFHVVDU\6,0FDUGEORFNHG
013
'HIDXOW6,0FDUG
014
6,0FDUGEXV\
015
(UURURQ6,0
030, 0 43,
057, 102 ,
132 , ...
•
1RQHWZRUNFRYHUDJH
•
7\SRJUDSKLFDOHUURULQWKH$31&RGH
XVHUQDPHSDVVZRUG
•
6,0FDUGQRWDFWLYDWHG
This error checklist is provided for information purposes only.
This is not a comprehensive list
, but it is representative of
most cases. Some events or codes are subject to change by SIM
card operators.
However, the GPRS level test errors results in the majority of
cases have the following causes :
•
SIM Card activation Delay:
Some operators require an additional delay up to 48 hours to
activate automatic data transmission. Please check with your
operator prior to installation.
•
APN CODE, USERNAME and PASSWORD :
The GPRS (2G3G) settings are supplied by the operator. Please
make sure you have entered the code exactly as indicated by
your local SIM card operator.
Note: When entering your SIM card settings, both APN codes,
username and password fields are case sensitive! (It makes a
difference between UPPER and lower case letters).
To switch between UPPER and lower case, use the M/m key from
CMA keypad or hold a digit key (0-9) for XMA/XMB.
•
Insufficient GPRS Network:
When the panel is unable to find any signal, proceed to GPRS
level test in another location on site. You can also find the
network state or condition of use by directly contacting your
local operator.
The following is a list of error codes that can appear after the 2G3G test.