Pairing the detector
1
Using a programmed alphanumeric keypad, access to level 4.
2
To unlock and get access to the installer level 4, you need to successively enter TWO
codes (in any order) :
• INSTALLER CODE (entered during intial programming)
• USER CODE (Level3): the user must authorize the installer to get access to the
configuration of his panel.
3
Once in level 4, proceed through the menu to reach ADD A NEW DEVICE.
4
Remove the OMV-VX shield to access the program button in order to pair the
detector with the Videofied
®
panel. Press and release the programming button.
5
The OMV-VX red LED will flash until it is paired with the panel. When linked with
the panel, the keypad will display :
The OMV-VX is now paired with your Videofied
®
panel. It now needs to be configured and tested.
Tue 29/10
11:23
DISARMED LVL:1
ACCESS LEVEL
1
ACCESS LEVEL
LEVEL : 1
ACCESS LEVEL
LEVEL : 4
OK
or
YES
OK
or
YES
OK
or
YES
BADGE OR CODE
ACCESS LEVEL
4
CONFIGURATION
GENERAL
PARAMETERS
OK
or
YES
AREAS AND
DEVICES
DEVICES
ADD A NEW
DEVICE
OK
or
YES
OK
or
YES
PRESS PROGRAM
BUTTON OF DEVICE
OK
or
YES
CAMERA (1 - 25)
RECORDED
Programming button
Shield
3
INSTALL SHEET
OMV-VX
OUTDOOR VISUAL VERIFICATION DETECTOR
