background image

9

www.videofied.com

INSTALL SHEET

OMVC

 OUTDOOR MOTION VIEWER

EMEA SALES

23, avenue du Général Leclerc
92340 BOURG-LA-REINE
FRANCE
E-Mail : [email protected]

North American Headquarters

1375 Willow Lake Blvd, Suite 103
Vadnais Heights, MN 55110
USA
E-Mail : [email protected]

The EC declaration of conformity of 
this product is available by flashing 
that QR code :

This symbol on the product or on its packaging indicates that this product should not be treated as household 
waste. It must be handed over to the applicable collection point for the recycling of electrical and electronic 
equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative 
consequences for the environment and human health. The recycling of materials will help to conserve natural 
resources.
For more information about recycling of this product, please contact your local municipality, your waste 
disposal service or the company that installed the product.

STANDARDS AND CERTIFICATIONS

OMVC 200

868MHz

Europe

Compliant with the annex IV of the 

R&TTE Directive 1999/5/EC

Intertek LSS (EN50131-2-2) Id: 16LHK0199-01

OMVC 601

902/928MHz - FHSS

Argentina

Certification number C-17501

Canada

IC (RSS-247 issue 1) Id: 8816A-MV50

Columbia

Costa Rica

SUTEL 00914-SUTEL-DGC-2017

Mexico

IFT Certification number RCPSISI17-0298

Panama

Certification number 1718

Peru

Certification number TRSS38410

«En Perú, este equipo diseñado para la banda de 902-928MHz, 

debe ser configurado para operar solo en la banda 915-928MHz 
con una PIRE de hasta 1W (30dBm) y sujeto a las Condiciones de 
Operación que establezca el MTC.»

USA

(Part 15C) Id: X46MV50

OMVC 702

915/928MHz - FHSS

Australia

C-Tick (AS/NZ4268)

OMVC 703

915/928MHz - FHSS

Chile

SUBTEL Certification number 2661/DO_36683/F26

OMVC 800

902/907.5MHz & 915/928MHz

Brazil

Certification Number 00615-17-10210

Este equipamento opera em caráter secundário, isto é, não 
tem direito a proteção contra interferência prejudicial, mesmo 

de estações do mesmo tipo, e não pode causar interferência a 
sistemas operando em caráter primário.

Summary of Contents for MotionViewer OMVC 200










Reviews: