88
2. From PC connected in the same Router, find IP address, Gateway, and Subnet mask by
IPCONFIG command in command prompt.
3. But if IP is something else like 192.168.x.xxx., you should change IP address, Subnet, Gateway on
the DVR. Go to SETUP>NETWORK>LAN of the DVR and change the IP settings to be like IP:
192.168.XXX.XXX and Gateway: 192.168.XXX.XXX. (Refer to the user’s manual of Router.)
Open your web browser. Enter the router IP address in the address bar (The router IP address are different
with the brand and model.), click GO.
4. Enter the user name and password (
admin
is
default) and press the
OK
button.
5. Select the Port Range Forwarding
tab.
6. Enter the each field.
i.
Application: Enter a description of the DVR (Example: store1)
ii.
Start: Enter the first number of the port you need to port forward (Example: 5445)
