NVR User Manual
24
Preset
: Set the No. of a preset point.
Name
: Set the name of a preset point.
Set
: Set the current position to a preset point by clicking this button.
Del Preset
: Delete the current preset point by clicking this button.
Click a PTZ camera channel where you want to create a preset point. Control the horizontal and vertical
positions of the PTZ camera. Type the No. and name of the preset point. Click
Set
. The preset point is
created successfully. You can click
Del Preset
to delete the preset point.
Pattern
: Set the number of the tour track.
Start
: Set the start point of the tour track.
End
: After you click
Start
, the PTZ starts pan/tilt. Return to the setting screen, click
End
and set the end
point of the tour track.
Click a PTZ camera channel where you want to set the tour track. Control the horizontal and vertical
positions of the PTZ camera. Type the No. of the tour track. Click
Start
and set the start point of the tour
track. Make the PTZ move along the expected tour route. Click
End
. The tour track is set successfully.
Border
: Set the number of the tour track.
Left
: Set the left border of the tour track.
Right
: Set the right border of the tour track.
Click a PTZ camera channel where you want to enable AutoScan. Set the left border and right border,
that is, set an AutoScan route.
