25
4Ch Real time/Triplex/Mux
- Stand Alone DVR
MOTION SETUP
MOTION SETUP : You can change values by mouse wheel and left/right button of a mouse.
- SENSITIYITY : Adjusting sensitivity of a movement. You can adjust level 1 ~ level 5. [DEFAULT : 1]
- DURATION : Whenever motion is detected and it is set at Motion Recording mode,
DVR records for a certain time being from the point of time when motion is detected.
(1 sec.~99 sec.) [DEFAULT : 1 sec.]
- DETECT CELL NUM. : Select the minimum of CELL for MOTION EVENT to be activated.
- ALL-DEFAULT: Default setup for all channels
MOTION MASK SETUP : Set motion detection area.
- CELL : Move to the location which you don’t want to detect and then click it by using left button.
Motion is detected, when the cell is activated. Motion is not detected on non-activated cells.
- BLOCK ON : Select non detection area by block. (The blocked cells are non-activated area)
By clicking left button and dragging a mouse, you can block the cells.
The right button is used for delete the blocked cells.
To save the setting value and exit, click ‘ESC
’
.
- BLOCK OFF : Select detection area by using the right button of a mouse.
The right button is used for delete the blocked cells.
To save the setting value and exit, click
‘
ESC
’
.
CHANNEL CH1
SENSITIYITY 5
DURATION 05
DETECT
CELL NUM. 01
DEFAULT ALL-DEFAULT ESC
Blocked Area
(non-motion detection area)
Non-Blocked Area
(motion detection area)
4) MOTION SETUP
CHAP. 5 Set up
