Video Products MONTEST-HD4K, Operation Manuals

Page: 19 / 56

14
COMMAND DESCRIPTION
$update_img480 Update the 640×480 image from
USB & reboot the unit.
$update_img1080 Update the 1920×1080 image
from USB & reboot the unit.
Note:
• All commands MUST start with the “$” character or the command
will not be recognized by the unit.
• Commands are not case-sensitive.
• Commands must end with a carriage return (0x0D). Use of a line
feed(0x0A) is optional.
• The characters “[“ and “]”are placed around variable command
parameters where there is a choice of more than one item. Please
type the selected parameter without the “[“ and “]”characters
when entering the command.
• The unit will respond to most commands with a repeat of the original
command followed by the specified parameters or requested
information except where otherwise noted. If an invalid command
is entered the unit will respond with “$err”.
• All unit responses end with a carriage return(0x0D) + line feed(0x0A).
• Only one command may be processed at a time. Do not send
additional commands until the response from the previous
command has been received.
• Some commands are not supported over Telnet.