Video Products MONTEST-HD4K, Operation Manuals

Page: 14 / 56

9
6.6 Remote Control
1
Analyzer/Pattern: Press to switch
between Analyzer Mode and Pattern
Mode.
2
EDID: Press repeatedly to switch
between the available EDIDs for the
HDMI input.
3
Color Space: Press repeatedly to
switch between the available color
space formats (RGB, YCbCr 4:4:4,
YCbCr 4:2:2 and YCbCr 4:2:0).
4
HDCP SW.: Press to switch between
supported HDCP versions or to
disable HDCP.
5
Format: Press to switch between DVI
and HDMI output formats.
6
VGA~4K6G: Press to directly select
the output resolution.
7
Output On: Press to enable video output.
8
Output Off: Press to disable video output.
9
T-/T+: Press (+/-) to select a new output resolution timing. Within the
OSD menu, press to adjust selections.
P+/P-: Press (+/-) to change the current test pattern. Within the
OSD menu, press to move up and down.
OK: After selecting a pattern, press and hold for 2 seconds to
switch to alternate variations of the pattern. Within the OSD menu,
press to confirm selections.
10
Menu: Press to enter the OSD menu.
11
Exit: Press to exit the OSD or cancel the selection.
12
Source*: Press to display source signal information on the OSD.
Video T*.: Press to display video analysis details on the OSD.
Audio T*.: Press to display audio analysis details on the OSD.
Packet*: Press to display the HDMI input’s packet analysis info.
Hotplug*: Press to force an RX hot-plug event on the input port.
OK
Output On
Pattern
Analyser/
HDCP SW.
Output Off
Color Space Format EDID
T+
Menu
P+
Exit
P-
T-
Audio CH Hotplug Packet
Sink AVMute1 AVMute0
Source Audio T. Video T.
VGA WXGA WUXGA
480p 720p 1080p
1080i 4K3G 4K6G
Vol+ Vol- Mute
1
2
7
6
9
10
12
13
4
5
3
8
11
14