ANTI-VANDAL 10x SPEED DOME CAMERA
74/96
Control Tool
Com1
For PTZ devices only. Select the PTZ control protocol.
Com2
For Digital I/O module only. Select the module type.
PTZ Camera ID
For PTZ Device Address Setup. 0 ~ 255 are available.
Baudrate, Data Bit
Stop Bit, Parity Bit
This setup is only for the non-standard protocols. Sometimes, PTZ protocol of some
manufacturers requires communication settings different from those of the
standard. To meet these special settings, click the check box of “
Use Advanced
Communication Setting”
bellow.
Use Advanced
Communication
Setting
Used to adjust Baud Rate, Data Bit, Stop Bit, Parity Bit of the selected protocol. Do
not use if the select protocol is standard.
Camera Pan
Direction
When the direction of camera pan is increasing clockwise, choose “CW.
Other wise, choose “CCW”.
ADMIN TOOL
7
