19616-001 Rev. D
DiagnosticPRO
Edge
Film Digitizer Installation Guide
13
4. Identify important features
Look over the digitizer and locate the features shown in this section. You will need to
know where these features are when you assemble and operate the digitizer in later
chapters.
Power switch
The power switch is located on the front of the digitizer.
To turn digitizer ON:
Press and release power switch.
To turn digitizer OFF:
Press and hold for two seconds.
CAUTION:
The digitizer power switch is used to disconnect the
24 volts from the external power adapter to the digitizer, and
therefore applies power to and removes power from the digitizer
only. The external power adapter is still a source of electrical
current as long as it is plugged into an electrical outlet.
Rear panel
View the digitizer from the rear to identify the USB port and power connector.
USB port
Power connector
