Vidal Sassoon WINGMAN VSM7235A, Manual

Page: 12 / 24

THE WINGMAN / TOOL TIPS
12
Using the 30mm trimming blade with the 5 position comb guide
1. To attach the 5 position comb guide, slide the comb guide onto the front of
the 30mm trimming blade and push down at the rear to lock into place – you
will hear a clicking noise when it’s in position.
2. The comb guide has 5 length settings, 3 mm, 6 mm, 9 mm, 12 mm & 15 mm. To
adjust the cutting length, push the button and click the comb guide forward
to the required position.
3. Select the required cutting length setting (3-15 mm). If you require more
than one cutting length, start with the longest length first.
4. Adjust the taper control as required.
5. Switch the trimmer on.
6. Hold the trimmer with the teeth of the trimmer pointing upwards, yet flat
against the skin.
7. Move the trimmer upwards and outward through the hair, against the
direction of hair growth.
8. The trimmer will work most efficiently when cutting through hair at its own
speed.
9. For increased trimming performance, press and hold the turbo button, this is
often necessary for thicker areas of hair.
10. Never switch the appliance off whilst in the hair.
11. To remove the 5 position comb guide, gently lift the guide off the head by
lifting the rear section.