Vidal Sassoon WINGMAN VSM7235A, Manual

Page: 9 / 24

THE WINGMAN / TOOL TIPS
9
CHANGING THE ATTACHMENT HEADS
1. Before changing the attachment heads, make sure your trimmer is switched
off.
2. Remove any comb guides attached to your trimmer.
3. To remove an attachment head, hold the handle of the trimmer with one hand,
while holding the attachment head with the other hand. Pull the attachment
head back and away from the front of the handle.
4. To attach an attachment head, the driving pin (Fig. 1) needs to be in a central
position. If it is not in the centre, manually move the pin into position. Then,
making sure that the base of the attachment head is seated in the handle,
click the attachment head into position.
IMPORTANT: Make sure the taper control is set to position number 1 when
changing the attachment heads.
Fig. 1