Victron energy MultiPlus 12/800/35, Manual

Page: 18 / 120

18
5.4.3 Exemplary settings
Example 1 is the factory setting (since factory settings are entered by computer, all DIP
switches of a new product are set to ‘off’).
DS-1 3 position switch off
DS-2 Charge voltage off
DS-3 Charge voltage off
DS-4 Frequency off
DS-5 Search mode off
DS-6 Store setting
→ ←
DS-1 off
DS-2 on
DS-3 off
DS-4 off
DS-5 off
DS-6
→ ←
DS-1 on
DS-2 on
DS-3 on
DS-4 on
DS-5 on
DS-6
→ ←
Example 1: (factory setting)
1
No 3 position
switch connected
2, 3
GEL 14.4 V
4 Frequency: 50Hz
5 Search mode off
6 S
tore setting: off→ on→ off
Example 2
1
No 3 position
switch connected
2,3
AGM 14,7V
4 Frequency: 50Hz
5 Search mode off
6 S
tore setting: off→ on→ off
Example 3
1
3 position
switch connected
2, 3
Tubular plate 15V
4 Frequency: 60Hz
5 Search mode on
6 S
tore setting: off→ on→ off
Store the settings by changing switch ds-6 from off to on, and then back to off.
The LEDs ‘charger’ and ‘alarm’ will flash to indicate acceptance of the settings.
6. MAINTENANCE
The MultiPlus does not require specific maintenance. It will suffice to check all connections
once a year. Avoid moisture and oil/soot/vapours, and keep the device clean.