Victron energy 24/8, Manual

Page: 4 / 33

4
2. SPECIFICATIONS
Primary voltage : 230Vac - 50/60Hz - 1-phase
Secondary nominal voltage : 24V
Charge voltage ‘absorption’ : 28,8V
Charge voltage ‘float’ : 27,6V
Charge voltage ‘storage’ : 26,4V
Maximum charge current : IMPULSE-II SMART 24/6: 6A;
: IMPULSE-II SMART 24/8: 8A
Battery type : Standard: Gel, AGM
Lithium or custom settings available via
Bluetooth with the VictronConnect
smartphone app.
Recommended battery capacity :
Min. Max.
(in order to charge 80% capacity within 8 hours)
IMPULSE-II SMART 24/6 40Ah 60Ah
IMPULSE-II SMART 24/8 60Ah 85Ah
Protection : - output short circuit, over voltage and reversed polarity
- high temperature
Input power IMPULSE-II SMART 24/6: 180W,
IMPULSE-II SMART 24/8: 240W
Efficiency : min. 90% (at full load)
Ambient temperature : -20°C to +40°C
Protection class : IP44 or IP65
Dimensions (hxwxd) : 60x105x190mm
Safety class II
Weight : 1kg
Storage temperature : -30°C to +50°C
Humidity : max. 95% (non-condensing)
3. SAFETY INSTRUCTIONS
•
Always provide proper ventilation during charging.
•
Avoid covering the charger.
•
Never try to charge non-rechargeable - or frozen batteries.
•
Never place the charger on top of the battery when charging.
•
Prevent sparks close to the battery. A battery being charged could emit explosive
gasses.
• Battery acid is corrosive. Rinse immediately with water if acid comes into contact with
skin.
•
This appliance is not designed for use by young children or people who cannot read or
understand the manual unless they are under the supervision of a responsible person to
ensure that they can use the battery charger safely. Store and use the battery charger
out of the reach of children, and ensure that children cannot play with the charger.
•
Connection to the mains supply must be in accordance with the national regulations for
electrical installations. In case of a damaged supply cord please contact the manufacturer
or your service agent.