Victrola VPRO-2000 Instruction Manual Download Page 4

 

 

 

4

 

14. 

Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in 
any way, such as power supply cord or plug is damaged, liquid has been spilled 
or objects have fallen into the apparatus has been exposed to rain or moisture, does not 
operate normally, or has been dropped. 

15. 

 
 
 
 
 
 
 
-This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the   
presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient 
magnitude to constitute a risk of electric shock. 
-Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no 
user-serviceable parts inside. Refer servicing to qualified personnel. 
-The exclamation point within and equilateral triangle is intended to alert the user to the presence of 
important operating and maintenance instructions in the literature accompanying the appliance. 

16. 

            This equipment is a Class 

 or double insulated electrical appliance. It has been designed in 

            such a way that it does not require a safety connection to electrical earth. 

17. 

The mains plug is used as disconnect device, the disconnect device shall remain readily operable. 

18. 

WARNING 
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus 
shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall not 
be placed on apparatus. 

19. 

The use of the equipment in moderate climate. 

20. 

The ventilation should not be impeded by covering the ventilation openings with items such as, newspapers, 
tablecloths, curtains, etc. 

21. 

No naked flame sources, such as lighted candles, should be placed on the apparatus. 

22. 

The symbol                with Indication AC voltage. 

23. 

The symbol with 

 indicate DC voltage. 

24. 

CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of 
electric shock, do not perform any servicing other than that contained in the operating instructions unless 
you are qualified to do so. 

 

ACCESSORIES INCLUDED: 

• INSTRUCTION MANUAL WITH WARRANTY (BACK OF MANUAL) 
• 45 RPM ADAPTER 
• SOFTWARE CD (FOR MAC & PC) 
• RCA CABLE 
• USB CABLE (FOR RECORDING) 
• COUNTER WEIGHT 
• SLIP MAT 
• QUICKSTART GUIDE 
• ACRYLIC DUST COVER

 

Summary of Contents for VPRO-2000

















Reviews: