background image

FCC STATEMENT:

This device complies with part 15 of the FCC Rules. Operation is subject to 

the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference

that may cause undesired operation. The antenna(s) used for this transmitter

must be installed to provide a separation distance of at least 20 cm from all

persons and must not be co-located or operating in conjunction with any 

other antenna or transmitter.

 

FCC NOTICE:

This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off 

and on, the user is encouraged to try to correct the interference by one or 

more of the following measures:

● Reorient or relocate the receiving antenna.

● Increase the separation between the equipment and receiver.

● Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

● Consult the dealer or an experienced radio/TV technician for help.

 

FCC WARNING:

To assure continued operation, follow the attached installation instructions 

and use only shield cables when connecting to other devices. Changes or

modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

Innovative Technology Electronics LLC.

Limited Warranty: 90 Days Labor, One Year Parts

 

Innovative Technology Electronics LLC. (IT) warrants the product to be free from 

“Defects” in materials under normal use for a period of “One Year” from the date 

of the original purchase. The Warranty is “Not” transferable. IT agrees, within the 

initial “90 Day” period, to repair or replace the product if it is determined to be 

defective at “No Charge”. It is further agreed that IT will cover the cost to repair or 

replace damaged “Parts” only for a total period of “One Year” from the date of the 

original purchase. The warranty does not cover cosmetic damage, antennas, AC 

cords, cabinets, headbands, ear-pads, or damage due to line power surges, 

WARRANTY

connection to improper voltage supply or settings, misuse, mishandling, accident, 

acts of God or attempted repair by an unauthorized service agent.

To obtain service, the purchaser MUST present an original sales receipt / 

proof of purchase. Please contact us at www.victrola.com to request an RMA 

(Return Material Authorization) number to return products for service or 

replacement. 

Returns without an RMA number on the package will be refused 

and returned to sender. Upon receipt of the returning item and our full inspection 

(IT) may issue a replacement to customer for the same item or of one that has 

equivalent value and features. To return an item, supply full name, return address, 

phone number, item purchased, receipt of purchase and reason for return to 

obtain RMA number.   
All returns must be in the original packaging or reasonable substitute to prevent 

damage. Customer  “Must” include full name, shipping address and telephone 

number inside of package. No return will be shipped back to a PO Box or APO 

address.
Please include your check or money order in the amount of:

• USD $5.00 for items $10.00 to $39.99. (Price Paid Per Unit)

• USD $10.00 for items $40.00 to $99.99. (Price Paid Per Unit)

• USD $16.00 for items $100.00 and up. (Price Paid Per Unit)

• Shipping fees are non-refundable

 

to be payable to Innovative Technology Electronics LLC. (for handling and return 

shipping charges) (IT) will not be responsible for delays or unprocessed claims 

resulting from a purchaser’s failure to provide any / all of the necessary 

information. Send all inquiries or RMA request via our website 

www.victrola.com/pages/technical-support

.

Innovative Technology Electronics LLC.

1 Channel Drive

Port Washington, NY 11050

Toll free: 1-877-483-2497

Website for support: www.victrola.com/pages/technical-support

 

There are no express warranties except as listed above.

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE 

EXCLUSIVE REMEDY OF THE CUSTOMER, (IT) SHALL NOT BE LIABLE FOR 

ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY 

EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE 

EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF 

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS 

PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential 

damages, or limitations on how long an implied warranty lasts, so the above 

exclusions or limitations may not apply to you. This warranty gives you specific 

legal rights and you may also have other rights, which vary from state to state.

10

Summary of Contents for ITSBL-547













Reviews: