Wall Vent
Roof Vent
Wall Vent
(alongside joist)
Attic Wall Vent
(optional remote blower)
Roof Vent
(optional remote blower)
Roof Blower
(optional)
Motor
Optional Backdraft Damper
Wrap insulation required
for cold climates
Minimum
6” Ø Duct
96”
*Max: 108”
36”
typical
Min: 26” Max: 30”
(30” min for 9’ ceiling)
12”
Varies
*Min height: 81”
f
rom bottom of duct
to ground when range
height to stove is
26”
Min height: 85
½
”
from bottom of duct
to ground when range
height to stove is
30”
• This range hood is factory set for venting through the roof or wall.
•
Duct work can terminate either through the roof or wall. To vent through a wall,
a 90° elbow is needed.
IMPORTANT:
•
NEVER exhaust air or terminate
duct work into spaces between
walls, crawl spaces, ceiling,
attics or garages. All exhaust
must be vented to the outside.
•
Use metal/aluminum duct work
only.
• Fasten all connections with
sheet metal screws and tape all
joints with certified Aluminum
Tape.
•
Use caulking to seal exterior
wall or roof opening around the
cap.
• Colder climates require wrap
-
ping insulation around the ducts
and optional blowers.
• The system must have a
Backdraft Damper.
* Due to different ceiling height configurations, recommended height may not be applicable.
VICTORY range hoods
| TWISTER
18
VICTORY range hoods
TWISTER | 19
VENTING METHODS (side view)
