Ca
binet
Counter
Top
Ceiling
Wall
Centerline
***Use woodscrews
(not included)
to mount onto the plywood.
***Use woodscrews
(not included)
to mount onto the plywood.
Install Mounting
Bracket
Apply spackle in
between spaces
of the plywood
and drywall
seamlessly.
Ca
binet
Counter
Top
Ceiling
Wall
**Use woodscrews (not included)
to mount into the studs.
**Use woodscrews (not included)
to mount into the studs.
Be alert of
any electrical
hazards before
plugging into
the outlet to
check the fan
motor and lights
are functioning.
Be alert of
any electrical
hazards before
plugging into
the outlet to
check the fan
motor and lights
are functioning.
Centerline
NOTE:
DO NOT USE threaded drywall anchors to support the hood when mounting the hood on
sheetrock. Mounting the hood on wall studs or lumbars is highly recommended.
CAUTION: Make certain the range hood is secure before releasing!
For safety purpose, pre-drilled mounting holes are provided through the back of the hood. For a more
secure installation, use as many mounting holes as needed to secure from the inside of hood.
(2) Apply spackle in between spaces of the plywood
and drywall seamlessly. Sand down any rough
spackle to smooth out. Paint area if required.
Use the drywall plastic anchors and metal screws to
install the mounting bracket to prepare for the upper
chimney.
**
Fasten #8 2-½“ woodscrews (not included) to
mount onto the plywood based on your earlier
measurements already established.
(3)
**
If added support is needed, from the inside rear
panel of the range hood, fasten #8 2-½“ woodscrews
(not included) to mount into the studs based on your
earlier measurements already established.
Connect the range hood to a designated standard
outlet (please refer to the product label for the suitable
voltage of this unit). Check the fan motor and lights
are functioning.
SAFETY WARNING:
Risk of electrical shock. this range hood must be properly grounded. Make sure this
is done by qualified electrician in accordance with all applicable national and local electrical codes. Before
connecting wires, switch power off at service panel and lock service panel to preduct power from being
switched on accidentally.
VICTORY range hoods
| TWISTER
16
VICTORY range hoods
TWISTER | 17
INSTALLATION (Continued)
