Operator
’s Manual Victory FMHDH Series - Page 43 of 52 -
Version 2.0
3.
Check and clean all axles. Check oil seals and replace them if necessary.
4.
Check all flails and replace them if they are worn out or damaged.
5.
Check the side skirts; return them to their original technical condition. Replace damaged or
broken protective devices.
6.
Remove the PTO shaft from the machine. Pull the PTO shaft apart. Check and replace any
components that are damaged or worn.
Install the PTO shaft on the device. The PTO shaft should telescope easily, and the guard
turns freely on the shaft, grease if necessary.
8.4
Lubrication / Cleaning table:
8 hrs/Daily:
40 hrs:
Annually:
Lubricate PTO Shaft:
Yes
Lubricate Caster Wheels:
Yes
Yes
Yes
Lubricate Rotor Spindle:
Yes
Yes
Yes
Lubricate rotor shaft:
Yes
Lubricate Rear roller bearings:
Yes
Clean side shift guide rods.
Yes
Yes
Clean Machine:
Yes
Clean PTO Shaft Cover guard:
Yes
