Operator
’s Manual Victory FMHDH Series - Page 35 of 52 -
Version 2.0
6.2.3
Aligning the pulleys
◼
Use a straight steel ruler to check that
the pulleys align.
◼
Adjust if necessary.
◼
Install the pulley cover.
6.3
Extra Instructions for PTO Shaft
1.
Park the tractor on a level surface. Slowly adjust the tractor’s three
-point hitch until the
tractor’s output shaft is level with the implement’s input shaft.
2.
Place the gear selector in the park mode, set the parking brake, shut the tractor off, and
remove the switch key.
