Victory BX42S Operator'S Manual Download Page 7 | Manualshive

Page: 7 / 51

background image

Operator

’s Manual Victory BX42S

- Page 7 of 51 -

Version 2.0

◼

Manufacturing date.

◼

Serial Number.

◼

Power.

◼

CE Mark.

Using This Manual

The meaning of t

his Operator’s Manual is

to help you familiarize yourself with Safety, Assembly,

Operation, Adjustments, Troubleshooting and Maintenance.

We have compiled this Operator

’s manual to help you understand and appreciate your

woodchipper.

Taking some time to read this manual and understand the Safety and Maintenance instructions will
give you better performance and extend the life of your woodchipper. You must read this manual
before assembling and operating the device.

The information contained within this manual was current at the time of printing. Some parts may
change slightly to assure you of the best performance. To check for updates, refer to our website
at

www.etractorimplements.com

or call

(562) 534-8182

to speak to one of our representatives.

Owner Assistance

If customer service or spare parts are required, please contact Victory Tractor Implements at
(562) 534-8182. Victory has trained technicians, spare parts, and equipment to service the device.

The parts on your machine are specially designed; replace these parts always with genuine Victory
parts. Please reference your order number or serial number when calling.

1.3

Warranty Provisions (See also Chapter 12)

Victory Tractor Implements guarantees the proper functioning of the provided equipment.
However, Victory is not responsible for unsafe situations, accidents, or damage, which are the
result of:

◼

ignoring warnings and regulations as stated on the machine or in this Operator's manual;

◼

the use of the device for other applications or under other circumstances than stated in this
documentation;

◼

mutations to the machine; this also includes the application of different replacement parts as
specified;

◼

insufficient or careless maintenance.

1.4

Liability

Victory Tractor Implements can't be held liable for consequential damage (business interruption,
product damage, etc.).

«
...
5
6
7
8
9
...
»

Summary of Contents for BX42S




















































Reviews:

No comments

Related manuals for BX42S

Brand: York Pages: 32

Precision NPC 015

Brand: NANO Pages: 42

EasyFresh Next L

Brand: irinox Pages: 38

Brand: Giant-Vac Pages: 34

Brand: Carrier Pages: 77

Hyperchill ICE150

Brand: Parker Hiross Pages: 188

Brand: TONDEO Pages: 72

Brand: Daikin Pages: 112

Brand: York Pages: 10

Brand: Hyundai Pages: 69

Brand: Philips Pages: 86

Brand: Philips Pages: 48

Brand: Philips Pages: 36

Brand: Philips Pages: 2

Brand: Philips Pages: 70

Brand: S-BOL Pages: 10

Brand: SAKAWA Pages: 101

Brand: York Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands