72
PRE-OPERATION CHECK
Check Brakes
Check Hoses and Connections
Inspect all brake hoses and connections for dampness or stains from
leaking or dried fluid. Tighten any leaking connections and replace
components as necessary.
Check Brake Pads
Look into the front brake caliper(s) from underneath to view the
front pad friction material, and look into the rear brake caliper from
behind to view the rear pad friction material. You should see at least
1/16 inch (1.6 mm) of friction material on each of the brake pads. If
in doubt, measure the remaining friction material. Replace brake
pads having less than the specified amount of friction material at
their thinnest point.
Check Throttle Control Grip and Cables
1. Rotate the throttle control grip. It should rotate smoothly from
its rest position to its completely open position and back again.
It should return to its rest position quickly when released.
2. Throttle freeplay, the amount of throttle control grip movement
from the rest position to the point of cable resistance, should be
1/8-1/4 inch (3-6 mm).
3. Adjust throttle cable freeplay if necessary (see page 115).
1/8--1/4 inch
(3--6 mm)
1
2
1. Front Brake Pad
Friction Material
2. Rear Brake Pad
Friction Material
Summary of Contents for Touring Cruiser 2003
