Victory Motorcycles Touring Cruiser 2003, Owner'S Manual

Page: 67 / 180

65
PRE-OPERATION CHECK
Check Electrical Equipment
To perform a pre-operation check on the electrical equipment, set the ignition switch to the ON position. Set the
ignition switch to the OFF position after completing the electrical equipment portion of the pre-operation check.
Instrument Cluster
The low fuel indicator and the neutral indicator should illuminate momentarily. The multi-function display (MFD)
should be in odometer mode. The low oil pressure indicator should illuminate. If the transmission is in neutral, the
neutral indicator should remain illuminated.
Pressing the MFD MODE button should advance the MFD through the various functions (see page 51).
Headlamp
Check the headlamp to see that it is on. Set the headlamp switch to the high beam position. The headlamp
brightness should increase and the headlamp high beam indicator in the instrument cluster should illuminate.
Taillight
With the ignition switch in the ON position, the taillight and the license plate light should illuminate. Apply slight
pressure to the front brake lever; taillight brightness should increase. Apply slight pressure to the rear brake pedal;
taillight brightness should increase.