MAINTENANCE
2.6
TUNE UP SPECIFICATIONS
ITEM
SPECIFICATION
Lubrication Oil Pressure @ 3000 rpm
552 kPa (80 psi)
Cooling Oil Pressure @ 3000 rpm
414 kPa (60 psi)
Drive Belt Deflection
All Except Touring Cruiser Models
8 mm (.315
″
) With 10-12 lb Load @ Center Span
Touring Cruiser Models
9 mm (.354
″
) With 10-12 lb Load @ Center Span
Throttle Grip Freeplay
3-6mm (1/8-1/4
″
)
Idle Speed
950 RPM
±
50
Fast Idle Speed
2000 RPM
±
100
Fast Idle Lever Freeplay
3-6mm (1/8-1/4
″
)
Clutch Lever Freeplay
.25-.75mm (.010-.030
″
)
Spark Plug Type / Gap
2002-2003
NGK CR7EB / .8mm (.032
″
)
(
)
2004 Touring Cruiser
NGK CPR6EA-9 / .8mm (.032
″
)
Start the engine and warm it up for several minutes. While warming up, check for oil leaks. If any leaks are found,
stop the engine immediately and determine the source of the problem before starting the engine again.
NOTE:
After the engine is started, the oil indicator light should go off. If the indicator light flickers or remains on,
immediately stop the engine and diagnose the problem before continuing.
TIGHTENING TORQUE
Drain Plug
(Inspect / replace O-ring or sealing washer)
2002 (22x1.5)
- 38 Nm (28 ft. lbs. )
2003-2004 (12x1.5)
- 27 Nm (20 ft. lbs. )
Oil Filter
3/4 full turn after contacting the sealing surface
OIL TYPE / QUANTITY
Oil Type
Victory Semi-Synthetic 20W40 Engine Oil
Oil and Filter Change
6.15 liters (6.5 quarts)
Use Victory 20W40 engine oil for all temperatures. If Victory oil is not available, use 20W40 SG or equivalent.
Do not put chemical additives in the oil. Victory motorcycle oil has
been specially designed for this application. Additional additives are
not necessary and have not been approved by Victory Engineering.
