GENERAL
1.9
Multi-Function Display (MFD) Modes and Operation
Instrument Cluster Light Dimmer
“DIM” appears as part of the display when in instrument cluster light dimmer mode. To change the intensity of
the instrument cluster light, press the MFD
Set
button to select from six (6) intensity levels. The engine does
not need to be running to change the light intensity.
To change to the next MFD function, press the MFD
Mode
button.
Headlamp High Beam Indicator Light Dimmer
“HB” appears as part of the display when in headlamp high beam indicator light dimmer mode. To change the
intensity of the headlamp high beam indicator light, press the MFD
Set
button to select from four (4) intensity
levels. The engine does not need to be running to change the indicator intensity.
To change to the next MFD function, press the MFD
Mode
button.
Fuel Gauge
The fuel gauge shows the amount of fuel in the fuel tank. The fuel gauge range is from LOW (0.8 gallons/3.03
liters) to FULL (5 gallons/18.9 liters).
To change to the next MFD function, press the MFD
Mode
button.
Voltmeter
When the engine is not running, “BAT” and the battery voltage appear.
When the engine is running, “ALT” and the charging system voltage appear.
To return to the odometer function, press the MFD
Mode
button.
Check Engine Indicator
The check engine indicator will flash “CH ENG” any time the the ignition switch is in the
On
position and the
Engine Control Module sensors report abnormal sensor or engine operation. The check engine indicator will
continue to flash as long as the fault condition exists.
