5
Assembly Instructions
For proper assembly, please read ALL of
the following instructions:
1. With your Grain Mill mounted correctly
to a sturdy surface, insert the milling
cone shaft through the front of the
Grain Mill body (see diagram 1).
2. Push the nylon washer onto the shaft as
far as it will go (see diagram 2).
3. Push the handle onto the shaft by lining
up the square edges of the shaft with the
square hole in the handle (see diagram 2).
4. Screw the adjustment knob onto the end
of the shaft, just until it is snug (see
diagram 2).
5. Place the hopper on top of the Grain
Mill, making sure it is pushed all the way
down.
6. Place a shallow bowl or pan in front of
the Grain Mill, under the milling cone,
before you begin the grinding process
(see picture below).
7. Your Grain Mill is now completely assembled and ready for use.
Please see the Use Instructions on p. 6 before operating your product.
1
2
