2
Mounting to suitable surface:
(mounting diagrams and info):
Before using the peeler needs to be properly secured to a suitable surface that is
secure and will stay firmly in place during use. Otherwise, the peeler will not work
properly.
VKP1010 Suction Base Peeler:
The suction mount must be used with a
smooth non-porous surface. When the suction cup is used on the correct mount-
ing surface it will stay firmly in place and allow the peeler to be used without need
to reattach. Surfaces that may not be suitable for use are wood, small or rough
tile, unsealed granite and textured surfaces or surfaces with cracks.
VKP1011 Clamp Base Peeler:
Needs to be attached to a firm sturdy sur-
face. The clamp base will attach to a surface thickness of 1/2-inch to 1-1/2 inch-
es. Clamp should only be tightened by hand. Do not use tools to tighten clamp, it
may damage the peeler and will void your warranty. See illustrations below for
proper and improper mounting examples:
CORRECT:
INCORRECT:
